PLANT TRAINING
![Telehandler training at Providence Training, Neyland. Pembrokeshire](https://providencetrainingltd.com/wp-content/uploads/2023/01/Telehandler_Training-1024x498.jpg)
GENERAL
Operating Plant in the workplace is a role that is skilled and carries with it a huge responsibility for the safety of those around you. Whether you are a Forklift Truck operator in a warehouse or a Telescopic Handler operator on site the smallest error has the potential to cause serious damage and harm.
Providence Training’s Plant courses will not only teach you how to operate the plant but will also ensure that you are given the knowledge and skills to operate safely.
Your course will cover the Health and Safety Legislation relevant to your role and industry best practice for operation and will include both theory and practical assessments.
Counterbalance Forklift Truck courses are scheduled regularly at our Centre in Neyland, Pembrokeshire but can also be carried out at your premises/site. Other plant categories are normally trained at your premises/site using your plant, however, these can also be held at our Centre either by using your plant or by hiring it in. The oinly exception to this are the static cranes.
Forklift Operator
Categories | Industrial Counterbalance, Sideloader, Masted Rough Terrain, Reach |
Awarding Body: | Qualpass |
Maximum Delegate Numbers | Novice Course – 3 Refresher Course – 4 |
Durations | Novice Operator – Min 3 days Re qualifying Operator – 1 Day Conversion – 1 Day |
Theory Assessment: | Multiple choice theory assessment. |
Practical Assessment: | All delegates will be required to prove their operational competence through practical assessment by safely lifting, travelling, manoeuvring, loading and stacking using a variety of loads and scenarios plus perform pre-use checks. |
Scheduled: | Industrial Counterbalance is scheduled regularly at our Centre. Other categories are run at your site/premises using your plant. |
What you will need: | Photo ID, NI Number. |
Lifting Operations | We must be notified in advance if you require lifting operations to be covered during your course. Training will address the plant operator side of the lifting operation only and will require a qualified Slinger Banksman to be present. If Slinger Banksman training is required, this can be addressed on separate course. You must have a Lifting Attachment and appropriate slings/chains all with current test certificates. |
Additional Info: | All plant must have a current test certificate. Your award will be valid for 3 years at which point you will be eligible to renew your award via the 1 day re-qualification/renewal course |
Info Sheet | [09082019_1001]_l2_food_safety_for_catering |
Telescopic Handler Operator
Categories | Telescopic Handler, Telescopic Handler 360′ Slew |
Awarding Body: | Qualpass |
Maximum Delegate Numbers | Novice Course – 3 Refresher Course – 1 Day |
Durations | Novice Operator – Min 3 days Re qualifying Operator – 1 Day Conversion – 1 Day |
Theory Assessment: | Multiple choice theory assessment. |
Practical Assessment: | All delegates will be required to prove their operational competence through practical assessment by safely lifting, travelling, manoeuvring, loading and stacking using a variety of loads and scenarios plus perform pre-use checks. |
Scheduled: | Held at your site/premises using your plant. We can also run this at our Centre, however, plant hire will have to be added to the cost of the course. |
What you will need: | Photo ID, NI Number, PPE. |
Lifting Operations | We must be notified in advance if you require lifting operations to be covered during your course. Training will address the plant operator side of the lifting operation only and will require a qualified Slinger Banksman to be present. If Slinger Banksman training is required, this can be addressed on separate course. You must have a Lifting Attachment and appropriate slings/chains all with current test certificates. |
Additional Info: | All plant must have a current test certificate. Your award will be valid for 3 years at which point you will be eligible to renew your award via the 1 day re-qualification/renewal course. Your award will cover you to operate a machine up to the boom length of the machine you were tested on. |
Info Sheet | [09082019_1001]_l2_food_safety_for_catering |
MEWP Operator (Mobile Elevated Work Platform)
Categories | MEWP (Mobile Elevated Work Platform) Operator – Telescopic and Articulated Self Propelled, Vertical and Scissor Lift |
Awarding Body: | Qualpass |
Maximum Delegate Numbers | Novice Course – 3 Refresher Course – 4 |
Durations | Novice Operator – 2 days Re qualifying Operator – 1 Day |
Theory Assessment: | Multiple choice theory assessment. |
Practical Assessment: | All delegates will be required to prove their operational competence through practical assessment including pre-use checks, manoeuvring, travelling, setting up and using the machine to access area at height. |
Scheduled: | Held at your site/premises using your plant or at our premises. If held at our premises, MEWP hire will be included in the costs. |
What you will need: | Photo ID, NI Number, PPE, Harness |
Lifting Operations | N/A |
Additional Info: | All boom based MEWP training will automatically include our full Harness Safety course at no extra cost. All plant must have a current test certificate. Your award will be valid for 3 years at which point you will be eligible to renew your award via the 1 day re-qualification/renewal course. Your award will cover you to operate a machine up to the tonnage of the machine you were tested on. |
Info Sheet | href=”https://providencetrainingltd.com/wp-content/uploads/2023/01/Mobile-Elevating-Work-Platform.pdf”>ot available”>MEWP Operator Fact Sheet |
Excavator Operator
Categories | 360′ and 180′, tracked and wheeled. |
Awarding Body: | Qualpass |
Maximum Delegate Numbers | Novice Course – 3 Refresher Course – 4 |
Durations | Novice Operator – Min 3 days Re qualifying Operator – 1 Day Conversion – 1 Day |
Theory Assessment: | Multiple choice theory assessment. |
Practical Assessment: | All delegates will be required to prove their operational competence through practical assessment by safely travelling, manoeuvring, excavating, banking loading and changing buckets plus performing pre-use checks. |
Scheduled: | Held at your site/premises using your plant. We can also run this at our Centre, however, plant hire will have to be added to the cost of the course. |
What you will need: | Photo ID, NI Number, PPE |
Lifting Operations | We must be notified in advance if you require lifting operations to be covered during your course. Training will address the plant operator side of the lifting operation only and will require a qualified Slinger Banksman to be present. If Slinger Banksman training is required, this can be addressed on separate course. You must have a Lifting Attachment and appropriate slings/chains all with current test certificates. |
Additional Info: | All plant must have a current test certificate. Your award will be valid for 3 years at which point you will be eligible to renew your award via the 1 day re-qualification/renewal course. Your award will cover you to operate a machine up to the tonnage of the machine you were tested on. |
Info Sheet | [09082019_1001]_l2_food_safety_for_catering |
Road Roller Operator
Categories | Road Roller Operator |
Awarding Body: | Qualpass |
Maximum Delegate Numbers | Novice Course – 4 Refresher Course – 6 |
Durations | Novice Operator – Min 1 days Re qualifying Operator – 1 Day |
Theory Assessment: | Multiple choice theory assessment. |
Practical Assessment: | All delegates will be required to prove their operational competence through practical assessment including pre-use checks, manoeuvring, travelling and compacting. To facilitate this a suitable area of hardcore or similar should be available. |
Scheduled: | Held at your site/premises using your plant. |
What you will need: | Photo ID, NI Number, PPE |
Lifting Operations | N/A |
Additional Info: | All plant must have a current test certificate. Your award will be valid for 3 years at which point you will be eligible to renew your award via the 1 day re-qualification/renewal course. Your award will cover you to operate a machine up to the tonnage of the machine you were tested on. |
Info Sheet | Not available |
Dumper Truck Operator
Categories | Dumper Truck Operator |
Awarding Body: | Qualpass |
Maximum Delegate Numbers | Novice Course – 4 Refresher Course – 6 |
Durations | Novice Operator – Min 1 days Re qualifying Operator – 1 Day |
Theory Assessment: | Multiple choice theory assessment. |
Practical Assessment: | All delegates will be required to prove their operational competence through practical assessment including pre-use checks, manoeuvring, travelling, loading and dumping. To facilitate this an excavator and operator or similar means of loading will need to be available. |
Scheduled: | Held at your site/premises using your plant. |
What you will need: | Photo ID, NI Number, PPE |
Lifting Operations | N/A |
Additional Info: | All plant must have a current test certificate. Your award will be valid for 3 years at which point you will be eligible to renew your award via the 1 day re-qualification/renewal course. Your award will cover you to operate a machine up to the tonnage of the machine you were tested on. |
Info Sheet | Not available |
Loading Shovel Operator
Categories | Loading Shovel Operator |
Awarding Body: | Qualpass |
Maximum Delegate Numbers | Novice Course – 3 Refresher Course – 4 |
Durations | Novice Operator – 2 days Re qualifying Operator – 1 Day |
Theory Assessment: | Multiple choice theory assessment. |
Practical Assessment: | All delegates will be required to prove their operational competence through practical assessment including pre-use checks, manoeuvring, travelling, and loading. Suitable material for loading should be on hand. |
Scheduled: | Held at your site/premises using your plant. |
What you will need: | Photo ID, NI Number, PPE, |
Lifting Operations | N/A |
Additional Info: | All plant must have a current test certificate. Your award will be valid for 3 years at which point you will be eligible to renew your award via the 1 day re-qualification/renewal course. Your award will cover you to operate a machine up to the tonnage of the machine you were tested on. |
Info Sheet | N/A |
Tractor Trailer Operator
Categories | Tractor Trailer Operator |
Awarding Body: | Qualpass |
Maximum Delegate Numbers | Novice Course – 3 Refresher Course – 4 |
Durations | Novice Operator – 2 days Re qualifying Operator – 1 Day |
Theory Assessment: | Multiple choice theory assessment. |
Practical Assessment: | All delegates will be required to prove their operational competence through practical assessment including pre-use checks, manoeuvring, travelling, and loading/unloading. Suitable material and a means of loading should be on hand. |
Scheduled: | Held at your site/premises using your plant. |
What you will need: | Photo ID, NI Number, PPE, |
Lifting Operations | N/A |
Additional Info: | All plant must have a current test certificate. Your award will be valid for 3 years at which point you will be eligible to renew your award via the 1 day re-qualification/renewal course. Your award will cover you to operate a machine up to the tonnage of the machine you were tested on. |
Info Sheet | N/A |
Ship Mounted Crane Operator
Categories | Ship Mounted Crane Operator, Ship Mounted Crane Operator and Slinger Banksman |
Awarding Body: | Qualpass |
Maximum Delegate Numbers | Novice Course – 6 Refresher Course – 8 |
Durations | Novice Operator – Min 2 days Re qualifying Operator – 1 Day |
Theory Assessment: | Multiple choice theory assessment. |
Practical Assessment: | All delegates will be required to prove their operational competence through practical assessment by safely lifting, manoeuvring and placing a variety of loads. |
Scheduled: | Held at your site/premises using your plant. |
What you will need: | Photo ID, NI Number, PPE |
Lifting Operations | We must be notified in advance if you require lifting operations to be covered during your course. Training will address the plant operator side of the lifting operation only and will require a qualified Slinger Banksman to be present. If Slinger Banksman training is required, this can be addressed on separate course. You must have appropriate slings/chains all with current test certificates. |
Additional Info: | All plant must have a current test certificate. Your award will be valid for 3 years at which point you will be eligible to renew your award via the 1 day re-qualification/renewal course. Your award will cover you to operate a machine up to the tonnage of the machine you were tested on. |
Info Sheet | Not available |
Jetty Crane Operator
Categories | Jetty Crane Operator, Jetty Crane Operator and Slinger Banksman |
Awarding Body: | Qualpass |
Maximum Delegate Numbers | Novice Course – 6 Refresher Course – 8 |
Durations | Novice Operator – Min 2 days Re qualifying Operator – 1 Day |
Theory Assessment: | Multiple choice theory assessment. |
Practical Assessment: | All delegates will be required to prove their operational competence through practical assessment by safely lifting, manoeuvring and placing a variety of loads. |
Scheduled: | Held at your site/premises using your plant. |
What you will need: | Photo ID, NI Number, PPE |
Lifting Operations | We must be notified in advance if you require lifting operations to be covered during your course. Training will address the plant operator side of the lifting operation only and will require a qualified Slinger Banksman to be present. If Slinger Banksman training is required, this can be addressed on separate course. You must have appropriate slings/chains all with current test certificates. |
Additional Info: | All plant must have a current test certificate. Your award will be valid for 3 years at which point you will be eligible to renew your award via the 1 day re-qualification/renewal course. Your award will cover you to operate a machine up to the tonnage of the machine you were tested on. |
Info Sheet | Not available |
Overhead Gantry Crane Operator
Categories | Overhead Gantry Crane Operator, Overhead Gantry Crane Operator and Slinger Banksman |
Awarding Body: | Qualpass |
Maximum Delegate Numbers | Novice Course – 6 Refresher Course – 8 |
Durations | Novice Operator – Min 2 days Re qualifying Operator – 1 Day |
Theory Assessment: | Multiple choice theory assessment. |
Practical Assessment: | All delegates will be required to prove their operational competence through practical assessment by safely lifting, manoeuvring and placing a variety of loads. |
Scheduled: | Held at your site/premises using your plant. |
What you will need: | Photo ID, NI Number, PPE |
Lifting Operations | We must be notified in advance if you require lifting operations to be covered during your course. Training will address the plant operator side of the lifting operation only and will require a qualified Slinger Banksman to be present. If Slinger Banksman training is required, this can be addressed on separate course. You must have appropriate slings/chains all with current test certificates. |
Additional Info: | All plant must have a current test certificate. Your award will be valid for 3 years at which point you will be eligible to renew your award via the 1 day re-qualification/renewal course. Your award will cover you to operate a machine up to the tonnage of the machine you were tested on. |
Info Sheet | Not available |
HIAB Operator (Knuckle Boom Loader)
Categories | Vehicle Mounted HIAB Operator and Vehicle Mounted HIAB Operator with Slinging |
Awarding Body: | Qualpass |
Maximum Delegate Numbers | Novice Course – 4 Refresher Course – 6 |
Durations | Novice Operator – Min 2 days Re qualifying Operator – 1 Day |
Theory Assessment: | Multiple choice theory assessment. |
Practical Assessment: | All delegates will be required to prove their operational competence through practical assessment by safely lifting, manoeuvring and placing a variety of loads. |
Scheduled: | Held at your site/premises using your plant. |
What you will need: | Photo ID, NI Number, PPE |
Lifting Operations | We must be notified in advance if you require lifting operations to be covered during your course. Training will address the plant operator side of the lifting operation only and will require a qualified Slinger Banksman to be present. If Slinger Banksman training is required, this can be addressed on separate course. You must have appropriate slings/chains all with current test certificates. |
Additional Info: | All plant must have a current test certificate. Your award will be valid for 3 years at which point you will be eligible to renew your award via the 1 day re-qualification/renewal course. Your award will cover you to operate a machine up to the tonnage of the machine you were tested on. |
Info Sheet | Not available |